Heated Vacuum degassing is the process of
using vacuum to remove gases from compounds which become entrapped in the
mixture when mixing the components. To assure a bubble-free mold when
mixing resin and silicone rubbers and slower-setting harder resins, a vacuum
chamber is required. A small vacuum
chamber is needed to eliminate air bubbles for materials prior to their
setting. The process is fairly straightforward. The casting or moulding
material is mixed according to the manufacturers directions.
—Product Features of the Heated Vacuum
Degassing Chamber
—Stainless steel chamber for long-term
air-tightness performance.
—Heavy Duty Industrial Heating System
—Adjustable Digital Temperature display and
Controller
—Various Temperature Ranges available on
request
—Burhani Vacuum
chamber has a rounded edge at the top, for the protection of silicone gasket.
—Vacuum gauge is assembled on a separate port, so that the
reading remains accurate even while pumping/venting the chamber.
—Gauge reading in both in Hg and Mpa.
—All kits are vacuum tested for 24 hours before packaging.
(leakage less than 2.0 inHg at 24 hours)
—Two-sided flippable vacuum gasket for better
durability and reliability.
—The gasket is chemically resistant to butane and other
solvents.
— Stainless Steel lid for long life .
—Strong elastic food grade silicone vacuum hose can
connect/disconnect easily with the pump/chamber.
—50um air filter on the vent valve to reduce air flow and
prevent any dust/powder flowing into the chamber.
—Easy to install and low-cost to maintain: the chamber can be
assembled in 5 minutes.
—45 day complimentary warranty and life-long parts support.
—
—Product Specs & Part List of the Chamber
—Vacuum Chamber: stainless steel
—Lid: Stainless Steel
—Controller : Microprocessor based
Digital Temperature controller
—Vacuum Gasket: silicone, resistant to
Butane and other solvents.
—Vacuum Gauge Assembly: 0.5 inHg accuracy.
—Valve Assembly: very high quality
air-tight brass valves, with 50um filter on vent port
—Vacuum Hose: 3.3' / 1 meter food
grade collapse-proof silicone hose, 3mm wall thickness (8mm I.D, 14mm O.D)
—Vacuum Pump Adapter: 3/8“ hose barb to 1/4
SAE flare port. . .
visit at: https://bhfvacuum.com/
Heated Vacuum Degassing Chamber
ReplyDeleteStrong elastic food grade silicone vacuum hose can connect/disconnect easily with the pump/chamber.https://bhfvacuum.com/heated-vacuum-degassing-chamber.html
ReplyDeleteThe casting or moulding material is mixed according to the manufacturers directions.
ReplyDeleteHeated Vacuum Degassing Chamber
SS Vacuum Chamber for degassing Vacuum degassing is the process of using vacuum to remove gases from compounds
ReplyDeleteanufactured by Burhani Engineering Technology is a vacuum system comprising of Vacuum chamber and vacuum pump that pulls 29 inches of mercury is used to remove the air from high viscosity materials like epoxy resin, Liquid silicone rubber, liquid plastic and Polyurethane rubber to make bubble free casting. Burhani Engineering Technology is the only exporter and manufacturer of resin vacuum degasser chamber in India for degassing silicone.
ReplyDelete