Vacuum degassing is the process of using vacuum to remove gases from compounds which become entrapped in the mixture when mixing the components. To assure a bubble-free mold when mixing resin and silicone rubbers and slower-setting harder resins, a vacuum chamber is required. A small vacuum chamber is needed to eliminate air bubbles for materials prior to their setting. The process is fairly straightforward. The casting or moulding material is mixed according to the manufacturers directions.
—Product Features of the Chamber
—Acrylic Plexi-Glass
chamber for long-term air-tightness performance.
—Burhani Vacuum
chamber has a rounded edge at the top,
for the protection of silicone gasket.
—Vacuum gauge is assembled on a separate port, so that the
reading remains accurate even while pumping/venting the chamber.
—Gauge reading in both in Hg and Mpa.
—All kits are vacuum tested for 24 hours before packaging.
(leakage less than 2.0 inHg at 24 hours)
—Two-sided flippable vacuum gasket for better
durability and reliability.
—The gasket is chemically resistant to butane and other
solvents.
— 25 mm thickness Acrylic lid for long life and clear
visibility.
—Strong elastic food grade silicone vacuum hose can
connect/disconnect easily with the pump/chamber.
—50um air filter on the vent valve to reduce air flow and
prevent any dust/powder flowing into the chamber.
—Easy to install and low-cost to maintain: the chamber can be
assembled in 5 minutes.
—45 day complimentary warranty and life-long parts support.
—Product Specs & Part List of the Chamber
—Vacuum Chamber: Plexi Glass Acrylic with 30
years warranty
—Lid: Acrylic
—Vacuum Gasket: silicone, resistant to
Butane and other solvents.
—Vacuum Gauge Assembly: 0.5 inHg accuracy.
—Valve Assembly: very high quality
air-tight brass valves, with 50um filter on vent port
—Vacuum Hose: 3.3' / 1 meter food
grade collapse-proof silicone hose, 3mm wall thickness (8mm I.D, 14mm O.D)
—Vacuum Pump Adapter: 3/8“ hose barb to 1/4
SAE flare port. .
visit at: https://bhfvacuum.com/
Resin degassing vacuum chamber
ReplyDeleteEasy to install and low-cost to maintain: the chamber can be assembled in 5 minutes. Easy to install and low-cost to maintain: the chamber can be assembled in 5 minutes
ReplyDeleteThe process is fairly straightforward. The casting or moulding material is mixed according to the manufacturers directions.
ReplyDeleteResin degassing vacuum chamber
Do write us if you have any further qyueries
ReplyDeleteanufactured by Burhani Engineering Technology is a vacuum system comprising of Vacuum chamber and vacuum pump that pulls 29 inches of mercury is used to remove the air from high viscosity materials like epoxy resin, Liquid silicone rubber, liquid plastic and Polyurethane rubber to make bubble free casting. Burhani Engineering Technology is the only exporter and manufacturer of resin vacuum degasser chamber in India for degassing silicone.
ReplyDelete