Vacuum Degassing Chamber

Vacuum Degassing Chamber

Vacuum degassing is the process of using vacuum to remove gases from compounds which become entrapped in the mixture when mixing the components. To assure a bubble-free mold when mixing resin and silicone rubbers and slower-setting harder resins, a vacuum chamber is required.  A small vacuum chamber is needed to eliminate air bubbles for materials prior to their setting. The process is fairly straightforward. The casting or moulding material is mixed according to the manufacturers directions. 

—Product Features of the Chamber

—Stainless steel chamber for long-term air-tightness performance.

—Burhani Vacuum chamber has a rounded edge at the top, for the protection of silicone gasket.

—Vacuum gauge is assembled on a separate port, so that the reading remains accurate even while pumping/venting the chamber.

—Gauge reading in both in Hg and Mpa.

—All kits are vacuum tested for 24 hours before packaging. (leakage less than 2.0 inHg at 24 hours)

—Two-sided flippable vacuum gasket for better durability and reliability.

—The gasket is chemically resistant to butane and other solvents.

— 25 mm thickness Acrylic lid for long life and clear visibility.

—Strong elastic food grade silicone vacuum hose can connect/disconnect easily with the pump/chamber.

—50um air filter on the vent valve to reduce air flow and prevent any dust/powder flowing into the chamber.

—Easy to install and low-cost to maintain: the chamber can be assembled in 5 minutes.

—45 day complimentary warranty and life-long parts support.

—

—Product Specs & Part List of the Chamber

—Vacuum Chamber: stainless steel

—Lid: Acrylic

—Vacuum Gasket: silicone, resistant to Butane and other solvents.

—Vacuum Gauge Assembly: 0.5 inHg accuracy.

—Valve Assembly: very high quality air-tight brass valves, with 50um filter on vent port

—Vacuum Hose: 3.3' / 1 meter food grade collapse-proof silicone hose, 3mm wall thickness (8mm I.D, 14mm O.D)

—Vacuum Pump Adapter: 3/8“ hose barb to 1/4 SAE flare port. .  

DOWNLOAD CATALOG

visit at: https://bhfvacuum.com/

SS Vacuum Chamber for drying

 

SS Vacuum Chamber for drying

Vacuum drying is the mass transfer operation in which the moisture present in a substance, usually a wet solid, is removed by means of creating a vacuum. In chemical processing industries like food processing, pharmacology, agriculture, and textiles, drying is an essential unit operation to remove moisture. Vacuum drying is generally used for the drying of substances which are hygroscopic and heat sensitive, and is based on the principle of creating a vacuum to decrease the chamber pressure below the vapor pressure of the water, causing it to boil. With the help of vacuum pumps, the pressure is reduced around the substance to be dried. This decreases the boiling point of water inside that product and thereby increases the rate of evaporation significantly. The result is a significantly increased drying rate of the product The vacuum drying process is a batch operation performed at reduced pressures and lower relative humidity compared to ambient pressure, enabling faster drying. 

—Product Features of the Chamber 

—Stainless steel chamber for long-term air-tightness performance.

—Burhani Vacuum chamber has a rounded edge at the top, for the protection of silicone gasket.

—Vacuum gauge is assembled on a separate port, so that the reading remains accurate even while pumping/venting the chamber.

—Gauge reading in both in Hg and Mpa.

—All kits are vacuum tested for 24 hours before packaging. (leakage less than 2.0 inHg at 24 hours)

—Two-sided flippable vacuum gasket for better durability and reliability.

—The gasket is chemically resistant to butane and other solvents.

— 25 mm thickness Acrylic lid for long life and clear visibility.

—Strong elastic food grade silicone vacuum hose can connect/disconnect easily with the pump/chamber.

—50um air filter on the vent valve to reduce air flow and prevent any dust/powder flowing into the chamber.

—Easy to install and low-cost to maintain: the chamber can be assembled in 5 minutes.

—45 day complimentary warranty and life-long parts support.

—

—Product Specs & Part List of the Chamber

—Vacuum Chamber: stainless steel

—Lid: Acrylic / Stainless Steel

—Vacuum Gasket: silicone, resistant to Butane and other solvents.

—Vacuum Gauge Assembly: 0.5 inHg accuracy.

—Valve Assembly: very high quality air-tight brass valves, with 50um filter on vent port

—Vacuum Hose: 3.3' / 1 meter food grade collapse-proof silicone hose, 3mm wall thickness (8mm I.D, 14mm O.D)

—Vacuum Pump Adapter: 3/8“ hose barb to 1/4 SAE flare port. .  

DOWNLOAD CATALOG 

visit at:  https://bhfvacuum.com/

SS Vacuum Chamber for degassing

SS Vacuum Chamber for degassing

Vacuum degassing is the process of using vacuum to remove gases from compounds which become entrapped in the mixture when mixing the components. To assure a bubble-free mold when mixing resin and silicone rubbers and slower-setting harder resins, a vacuum chamber is required.  A small vacuum chamber is needed to eliminate air bubbles for materials prior to their setting. The process is fairly straightforward. The casting or moulding material is mixed according to the manufacturers directions.  

—Product Features of the Chamber

—Stainless steel chamber for long-term air-tightness performance.

—Burhani Vacuum chamber has a rounded edge at the top, for the protection of silicone gasket.

—Vacuum gauge is assembled on a separate port, so that the reading remains accurate even while pumping/venting the chamber.

—Gauge reading in both in Hg and Mpa.

—All kits are vacuum tested for 24 hours before packaging. (leakage less than 2.0 inHg at 24 hours)

—Two-sided flippable vacuum gasket for better durability and reliability.

—The gasket is chemically resistant to butane and other solvents.

— 25 mm thickness Acrylic lid for long life and clear visibility.

—Strong elastic food grade silicone vacuum hose can connect/disconnect easily with the pump/chamber.

—50um air filter on the vent valve to reduce air flow and prevent any dust/powder flowing into the chamber.

—Easy to install and low-cost to maintain: the chamber can be assembled in 5 minutes.

—45 day complimentary warranty and life-long parts support.

—

—Product Specs & Part List of the Chamber

—Vacuum Chamber: stainless steel

—Lid: Acrylic

—Vacuum Gasket: silicone, resistant to Butane and other solvents.

—Vacuum Gauge Assembly: 0.5 inHg accuracy.

—Valve Assembly: very high quality air-tight brass valves, with 50um filter on vent port

—Vacuum Hose: 3.3' / 1 meter food grade collapse-proof silicone hose, 3mm wall thickness (8mm I.D, 14mm O.D)

—Vacuum Pump Adapter: 3/8“ hose barb to 1/4 SAE flare port. .  

DOWNLOAD CATALOG

visit at:  https://bhfvacuum.com/

Resin degassing vacuum chamber

Resin degassing vacuum chamber

Vacuum degassing is the process of using vacuum to remove gases from compounds which become entrapped in the mixture when mixing the components. To assure a bubble-free mold when mixing resin and silicone rubbers and slower-setting harder resins, a vacuum chamber is required.  A small vacuum chamber is needed to eliminate air bubbles for materials prior to their setting. The process is fairly straightforward. The casting or moulding material is mixed according to the manufacturers directions.






—Product Features of the Chamber 

—Acrylic Plexi-Glass chamber for long-term air-tightness performance.

—Burhani Vacuum chamber has a rounded edge at the top,

for the protection of silicone gasket.

—Vacuum gauge is assembled on a separate port, so that the reading remains accurate even while pumping/venting the chamber.

—Gauge reading in both in Hg and Mpa.

—All kits are vacuum tested for 24 hours before packaging. (leakage less than 2.0 inHg at 24 hours)

—Two-sided flippable vacuum gasket for better durability and reliability.

—The gasket is chemically resistant to butane and other solvents.

— 25 mm thickness Acrylic lid for long life and clear visibility.

—Strong elastic food grade silicone vacuum hose can connect/disconnect easily with the pump/chamber.

—50um air filter on the vent valve to reduce air flow and prevent any dust/powder flowing into the chamber.

—Easy to install and low-cost to maintain: the chamber can be assembled in 5 minutes.

—45 day complimentary warranty and life-long parts support.

—Product Specs & Part List of the Chamber

—Vacuum Chamber: Plexi Glass Acrylic with 30 years warranty

—Lid: Acrylic

—Vacuum Gasket: silicone, resistant to Butane and other solvents.

—Vacuum Gauge Assembly: 0.5 inHg accuracy.

—Valve Assembly: very high quality air-tight brass valves, with 50um filter on vent port

—Vacuum Hose: 3.3' / 1 meter food grade collapse-proof silicone hose, 3mm wall thickness (8mm I.D, 14mm O.D)

—Vacuum Pump Adapter: 3/8“ hose barb to 1/4 SAE flare port. .  

DOWNLOAD CATALOG 

visit at: https://bhfvacuum.com/

Heated Vacuum Oven with Pump

Heated Vacuum Oven with Pump

Burhani Vacuum oven is provided with digital electronic control, built-in over-temperature protection, and a fully flexible vacuum/purge/release system for a range of applications including those that require elevated temperature in reduced atmosphere.

These heated vacuum oven Chamber provide precise and fast heating and heat transfer which helps minimize operation time. These vacuum ovens are compliant with the highest level of requirements for heating applications under a vacuum. LED display of actual and set point temperature.  Temperature Range available as per customer requirements. Digital microprocessor control

Product Features of the Heated Vacuum Oven

—Stainless steel chamber for long-term air-tightness performance.

—Heavy Duty Industrial Heating System

—Adjustable Digital Temperature display and Controller

—Various Temperature Ranges available on request

—Burhani Vacuum chamber has a rounded edge at the top, for the protection of silicone gasket.

—Vacuum gauge is assembled on a separate port, so that the reading remains accurate even while pumping/venting the chamber.

—Gauge reading in both in Hg and Mpa.

—All kits are vacuum tested for 24 hours before packaging. (leakage less than 2.0 inHg at 24 hours)

—Two-sided flappable vacuum gasket for better durability and reliability.

—The gasket is chemically resistant to butane and other solvents.

— Stainless Steel lid for long life .

—Strong elastic food grade silicone vacuum hose can connect/disconnect easily with the pump/chamber.

—50um air filter on the vent valve to reduce air flow and prevent any dust/powder flowing into the chamber.

—Easy to install and low-cost to maintain: the chamber can be assembled in 5 minutes.

—45 day complimentary warranty and life-long parts support.

—

—Product Specs & Part List of the Chamber

—Vacuum Chamber: stainless steel

—Lid: Stainless Steel

—Controller : Microprocessor based Digital Temperature controller

—Vacuum Gasket: silicone, resistant to Butane and other solvents.

—Vacuum Gauge Assembly: 0.5 inHg accuracy.

—Valve Assembly: very high quality air-tight brass valves, with 50um filter on vent port

—Vacuum Hose: 3.3' / 1 meter food grade collapse-proof silicone hose, 3mm wall thickness (8mm I.D, 14mm O.D)

—Vacuum Pump Adapter: 3/8“ hose barb to 1/4 SAE flare port.

DOWNLOAD CATALOG

visit at: https://bhfvacuum.com/

Heated Vacuum Degassing Chamber

Heated Vacuum Degassing Chamber

Heated Vacuum degassing is the process of using vacuum to remove gases from compounds which become entrapped in the mixture when mixing the components. To assure a bubble-free mold when mixing resin and silicone rubbers and slower-setting harder resins, a vacuum chamber is required.  A small vacuum chamber is needed to eliminate air bubbles for materials prior to their setting. The process is fairly straightforward. The casting or moulding material is mixed according to the manufacturers directions.

—Product Features of the Heated Vacuum Degassing Chamber 

—Stainless steel chamber for long-term air-tightness performance.

—Heavy Duty Industrial Heating System

—Adjustable Digital Temperature display and Controller

—Various Temperature Ranges available on request

—Burhani Vacuum chamber has a rounded edge at the top, for the protection of silicone gasket.

—Vacuum gauge is assembled on a separate port, so that the reading remains accurate even while pumping/venting the chamber.

—Gauge reading in both in Hg and Mpa.

—All kits are vacuum tested for 24 hours before packaging. (leakage less than 2.0 inHg at 24 hours)

—Two-sided flippable vacuum gasket for better durability and reliability.

—The gasket is chemically resistant to butane and other solvents.

— Stainless Steel lid for long life .

—Strong elastic food grade silicone vacuum hose can connect/disconnect easily with the pump/chamber.

—50um air filter on the vent valve to reduce air flow and prevent any dust/powder flowing into the chamber.

—Easy to install and low-cost to maintain: the chamber can be assembled in 5 minutes.

—45 day complimentary warranty and life-long parts support.

—

—Product Specs & Part List of the Chamber

—Vacuum Chamber: stainless steel

—Lid: Stainless Steel

—Controller : Microprocessor based Digital Temperature controller

—Vacuum Gasket: silicone, resistant to Butane and other solvents.

—Vacuum Gauge Assembly: 0.5 inHg accuracy.

—Valve Assembly: very high quality air-tight brass valves, with 50um filter on vent port

—Vacuum Hose: 3.3' / 1 meter food grade collapse-proof silicone hose, 3mm wall thickness (8mm I.D, 14mm O.D)

—Vacuum Pump Adapter: 3/8“ hose barb to 1/4 SAE flare port. . .

DOWNLOAD CATALOG 

visit at: https://bhfvacuum.com/

Acrylic Vacuum Chamber

Acrylic Vacuum Chamber

—Product Features of the Chamber

—Acrylic Plexi-Glass chamber for long-term air-tightness performance.

—Burhani Vacuum chamber has a rounded edge at the top, for

the protection of silicone gasket.

—Vacuum gauge is assembled on a separate port, so that the reading remains

accurate even while pumping/venting the chamber.

—Gauge reading in both in Hg and Mpa.

—All kits are vacuum tested for 24 hours before packaging. (leakage less than 2.0 inHg at 24 hours)

—Two-sided flippable vacuum gasket for better durability and reliability.

—The gasket is chemically resistant to butane and other solvents.

— 25 mm thickness Acrylic lid for long life and clear visibility.

—Strong elastic food grade silicone vacuum hose can connect/disconnect easily with the pump/chamber.

—50um air filter on the vent valve to reduce air flow and prevent any dust/powder flowing into the chamber.

—Easy to install and low-cost to maintain: the chamber can be assembled in 5 minutes.

—45 day complimentary warranty and life-long parts support.

—

—Product Specs & Part List of the Chamber

—Vacuum Chamber: Plexi Glass Acrylic with 30 years warranty

—Lid: Acrylic

—Vacuum Gasket: silicone, resistant to Butane and other solvents.

—Vacuum Gauge Assembly: 0.5 inHg accuracy.

—Valve Assembly: very high quality air-tight brass valves, with 50um filter on vent port

—Vacuum Hose: 3.3' / 1 meter food grade collapse-proof silicone hose, 3mm wall thickness (8mm I.D, 14mm O.D)

—Vacuum Pump Adapter: 3/8“ hose barb to 1/4 SAE flare port. .  

DOWNLOAD CATALOG

visit at:  https://bhfvacuum.com/